1993 Ford E-250 Econoline Archives | Aluminess

test

Rear Bumper – E-Series 1992+

Storage is a premium when converting a van into your home away from home. If your Ford Econoline is a 4×4, then you also have to compete with a tire that no longer fits underneath your van. The solution is an Aluminess off-road Rear Bumper equipped with the spare tire carrier and the box swing arm. With 2 swing arms to hold your spare tire and a storage box, you will now have more room for the essentials to put inside your Econoline. In most cases, any of our boxes will work on the swing arm, so whether it’s extra fuel, a generator, or recovery gear that you need, your Aluminess off road rear bumper is there to save the day.

Key Features:

  • 150 lbs. Weight Limit On Standard Swing Arm.
  • 200 lbs. Weight Limit On Bike Rack Swing Arm.
  • 35″ Maximum Tire Size.
  • Powder-coated Black.
  • Compatible with 8 x 6.5″ and 8 x 170mm Wheel Bolt Patterns.
  • Sensor holes can be drilled upon request.

PLEASE NOTE: Products shown with available options – boxes, lights, and accessories are not included in standard bumper price.

Weekender Roof Rack – E-Series 1992+

Most people purchase vans so they can take lots of people and lots of gear without towing a U-haul trailer or bringing along a second car. What happens when you have too many friends? Where are you going to put all that gear? An Aluminess roof rack, of course! Whether you have the factory Ford van, a Sportsmobile penthouse top(pop top), or a Sportsmobile fiberglass top, we have a rack that works for you. Our Weekender Roof Rack is perfect for carrying cargo boxes, surf boards, or just lounging around and watching the world go by. It is available with two flooring options, perforated aluminum, which is perfect for lawn chairs and walking around, and slats which are great for tying down precious cargo. The standard length on the roof rack is from the rear of the van up to the back of the front doors. This gives ample storage space while keeping cargo behind your head and reducing noise.

Choose your van’s body length, desired roof rack flooring and mounting style to determine pricing

Double Loop/Slats – Double Loop, Low Profile basket with slat flooring; walkable and easy to tie down cargo

Double Loop/Perforated – Double Loop, Low Profile basket with perforated flooring; great platform for lawn chairs, tripods, or a sleeping platform

Products are shown with available build options – mounting style, rack style, flooring, and accessories

 

NOTE: Sportsmobile WEST and TX/IN have different roof rack mounting points. Please use the image below as reference

Graphic displaying the main differences between Sportsmobile West versus Texas/Indiana.

Rear Door Tire Rack – E-Series 1992+

The Aluminess Ford Van Tire Rack is essential to anyone converting their van to four-wheel drive. When upgrading to larger tires, your spare will likely no longer fit under your vehicle. Instead of leaving your spare at home (bad idea), you can equip your van with our tire rack! The rack mounts to the frame for a secure connection and is located on the driver’s side for easy access to the back of your van.

Features:

Powder coated textured black.

Maximum tire size is 35″.

Compatible with 8 x 6.5″ and 8 x 170mm Wheel Bolt Patterns.

Compatibility:

This tire rack will not fit with vehicles that have a body lift. Please contact Aluminess for options if your van is equipped with a body lift.

This tire rack is set up for wheel/tire combos with 5.75″ backspacing (including tire bulge). If you have something different, please contact Aluminess for options.

Surf Pole – E-Series 1992+

Storage is at a premium on van builds. Aluminess solves this problem with our all-aluminum surf and paddle board carrier. Mount your paddle or surf board using one of our surf poles, driver-side ladder and a pair of surf hooks.

Ladder and Surf Hooks sold separately

NOTE: If you have Aluminess Nerf Bars installed, please give us a call and we will provide special mounting hardware when placing your order

Side Ladder – E-Series 1992+

Whether you have an Aluminess roof rack, or just a plastic storage box, the van roofs are a great place to store bulky things. The problem is how you get up there to strap everything down. Aluminess solves this problem with their all-aluminum Side Ladder for the Ford E-Series. These mount to the side of the vehicle solving the problem of drilling through your rear van door. Passenger side ladders are recommended to avoid traffic unless you have an awning that gets in the way.

Nerf Bars – E-Series 1992+

Four Wheel Drive conversions often lift the van higher off the ground. This means that an already tall vehicle becomes more difficult to get into. The Aluminess Nerf Bars for the Ford E-Series make it easy to get in and out of your van again. With 20″ long tread plate steps at each door, there is ample room to step into the van with ease. The all Aluminum construction is great for keeping the weight down and the powder coated finish is durable enough to handle the toughest elements.

Nerf bars include both driver and passenger side

Front Bumper – E-Series 1992-07

Aluminess designed the Front Winch Bumper for the 1992-2007 Ford E-Series van to look good and perform even better. The all-aluminum construction weighs just 85 pounds, so there is no need to worry about brakes, suspension, steering, and tires wearing out prematurely. Aluminum also doesn’t rust, so your bumper will hold up even in salty environments. The front bumper will hold a Warn M12000 or 16.5ti winch and is powder coated black. If you don’t run a winch, the bumper has a lockable storage compartment to hold tire chains, tow straps, and many other parts you don’t want cluttering up your van. Aluminess builds shackle mounts into all of their front bumpers to accept a shackle with 7/8 in. pin. Whether you want to tackle the off road or protect your rig against pesky wildlife, an Aluminess bumper is sure to get the job done.

All front winch bumpers now have vents and the Aluminess “A” Cut into the front

Standard bumper configuration is with a 1.5” Brush Guard

Products shown with available options – Lights, shackles, winches, receivers, and brush guard crossbars not included in standard bumper price

All bumpers are now made with SQUARE light holes.

PLEASE NOTE: Winch manufacturers are continually changing winch sizes and designs. Solenoid relocation will likely be required with this bumper.